Ritter & Stark GmbH to Exhibit at Waffen-Sammlerbörse

Ritter & Stark SX-1 Modular Tactical Rifle in .338

Ritter & Stark will exhibit the SX-1 Modular Tactical Rifle and the SLX Series model SLX-308 at Booth #409 at Waffen-Sammlerbörse in Lucerne, Switzerland, March 24 – 26, 2017.

Feistritz, Austria (March 2017) – Ritter & Stark GmbH, an Austrian-based firearms design and manufacturing company, will be exhibiting the SX-1 Modular Tactical Rifle (MTR) and the SLX Series model SLX-308 at Booth #409 at Waffen-Sammlerbörse in Lucerne, Switzerland, March 24 – 26, 2017. The Waffen-Sammlerbörse is the oldest gun show in Switzerland and one of the most important in Europe, drawing in over 10,000 visitors.

At Ritter & Stark the world’s top firearms engineers and designers have used the latest manufacturing processes and most technologically advanced materials to create the SX-1 MTR and the SLX Series rifles.

The SX-1 MTR can quickly and easily change calibers between a .308 Win, .300 Win Magnum and a .338 Lapua Magnum. The MIL-STD 1913 Picatinny rail is installed directly on the barrel, allowing the user to interchange barrels with pre-set scopes without a loss of zero. The patented caliber conversion system assures that the barrel is precisely positioned in the machined aluminum receiver, allowing for a greater area of contact, resulting in increased stability. The bolt also locks directly into the barrel breech which gives the rifles unprecedented accuracy. The rifles are compatible with AR-15 pistol grips and comes with a fully-adjustable, standard two-stage Remington 700 compatible trigger, allowing the operator to customize the grip and trigger to his preference. The buttstock is fully adjustable with the height and angle of the cheek piece, length of pull and recoil pad are all also capable of being fully adjusted. The SX-1 MTR can also utilize aftermarket AR-15 type buttstocks for a personalized fit.

Ritter & Stark’s newest offering is the SLX Series, a short-action version of the SX-1, but lighter and shorter in length. The first model available in the series is the SLX-308/7.62×51 NATO. In the following months, Ritter & Stark will also offer the SLX in .260 Remington and 6.5 Creedmoor. Change calibers simply by changing the barrel only. The SLX series buttstock is fully adjustable and an R&S folding stock mechanism (optional) can be installed allowing the buttstock to fold left or right and allow it to be locked folded. Featuring a fully adjustable, standard 2-stage Remington 700 compatible trigger and a heat dissipating foreend (option rail adaptor minimizing weight and allowing for M-LOK accessories to be mounted), the SLX-308 can also use standard AR-15 pistol grips (no beavertail). The SLX series comes with detachable PMAG® 10 AR/M4 Gen M3™ high capacity polymer mags (10-rd.)

Ritter & Stark SLX Series in .308

Ritter & Stark SLX Series in .308

One of the secrets to Ritter & Stark’s accuracy is its unique barrel production. No other barrel maker in the world manufacturers their barrels like Ritter & Stark. The rifling is processed in a CNC-controlled electrochemical machine. This avoids the transmission of thermal effects and mechanical stress to the material. Furthermore, this process allows Ritter & Stark to produce barrels with unique uniformity and within tolerance zones that were not possible in serial production before.

Ritter & Stark barrels are guaranteed to perform for at least 2,000 to 5,000 rounds, depending upon caliber, until any noticeable degradation in accuracy occurs. Every barrel is tested at the factory and can achieve 0.5 MOA with 3-round groups or better using factory match grade ammunition.

Visit Ritter & Stark at Waffen-Sammlerbörse and see its revolutionary rifle systems in booth #409. For sales appointments during the exhibition, please contact Joerg Stuppnigg at +43 664 88 54568. For media appointments, contact Laura Burgess at +1 252-288-5805.

About Ritter & Stark GmbH:

Ritter & Stark GmbH, headquartered near Ferlach, Austria, was founded in 2015 to provide military, law enforcement and shooting sports enthusiasts with the most advanced firearms systems, built to exacting tolerances using state-of-the-art manufacturing processes in a next generation production facility. www.ritterstark.com

 

Ritter & Stark Rifle Specifications:

SX-1 MTR Specifications:

CALIBER .308 Win (7.62X51 NATO) .300 Win Magnum .338 Lapua Magnum
Barrel Length 24.5” / 623 mm 27.15” / 690 mm 27.15” / 690 mm
Overall Length 47.3” / 1202 mm 50.8” / 1291 mm 50.8” / 1291 mm
Length Folded 37.5” / 953 mm 41” / 1041 mm 41” / 1041 mm
Overall Width 3.2” / 81 mm 3.2” / 81 mm 3.2” / 81 mm
Width Folded 4” / 103 mm 4” / 103 mm 4” / 103 mm
Rifling Grooves 6 6 6
Rifling Twist 1:11” / 280 mm 1:10” / 254 mm 1:10” / 254 mm
TTL Weight (w/o mag) 12.8 lbs. / 5.9 kg 13.7 lbs. / 6.3 kg 13.7 lbs. / 6.3 kg
Ultralight Model Weight 11.25 lbs. / 5.2 kg 11.9 lbs. / 5.5 kg 11.9 lbs. / 5.45kg
Magazine Capacity 10 rounds 5 / 10 rounds 5 / 10 rounds
Stock Length Adjustment 2.4” / 60 mm 2.4” / 60 mm 2.4” / 60 mm
Optical Interface MIL-STD 1913 Picatinny rail with 12, 20 or 40 MOA forward inclination.
Accessories Interface Allows MIL-STD 1913 Picatinny rails via M-LOK™ or M5 screws. Octagonal cross section enables handguard to accept accessories in 45° steps.
Folding Stock MIL-STD 1913 Picatinny rail to attach a monopod.

 

SLX-308 Specifications:CALIBER .308 Win.
Barrel length 508 mm (20”) / 558 mm (22”) / 609 mm (24”)
Overall length 1000 mm (39.4”)
Length with folded stock 760 mm (30”)
Overall width 81 mm (3.2”)
Width with folded stock 103 mm (4”)
Rifling – # of grooves 6
Rifling – twist (1 turn) 280 mm (1:11”) right
Total weight 3.73…5.18 kg (8.2…11.4 lbs.)
Magazine capacity 10 rounds
Min. barrel life 5,000 rounds (compliance to NATO AC-225 D.14)
Stock length adjustment 60mm (2.4”)
Cheek piece height adjustment 27mm (1.1”)
Butt plate height adjustment ±23mm (±0.9”)
Trigger adjustability Slack, preliminary pull, pull, drag
Trigger weight Adjustable between 600 g…1500 g (1.3lbs – 3.3lbs.)
Safety system 3-position safety: F…fire, S…safe (firing pin locked), L…lock (locks the bolt for transport).
Optical interface MIL-STD-1913 Picatinny Rail with 12, 20 or 40 MOA forward inclination.
Accessory interface M-LOK Allows the installation of MIL-STD-1913 Picatinny Rails via M-LOK or M5-Screws. The octagonal cross section enables the handguard to accept accessories in 45° steps.